Customize, Mark, Engrave, Cut

with our range of CO2 lasers

Main functions of red laser pointer is:
- to set laser starting point on marked/cut/engraved part

- to simulate work by following its path

 

 

LTT laser driver is similar to a printer driver. It is therefore possible to simply control laser from any graphics software (Coreldraw, Autocad, Inkscape ...).

Several modes are available: normal, stamp, photographic, 3D engraving ...

User friendly and all in French, it is easy to use.

From 60 W power, our lasers are equipped with ceramic laser tubes.

Unlike metallic or glass tubes, active gas is not in contact with metallic elements and produces finer and purer beam resulting in better thermal stability for improved working life.

 

 

Available and adjustable on each optic, the air flow avoids dust deposit on optics for reduced maintenance and  flame production on processed material.

 

Autofocus automatically adjusts the laser table height to get a correct concentration (focusing) of the laser beam.
The autofocus sensor "touches" material and then automatically adjusts the table according to lens.

I Laser series is equipped with very high precision guidance with two position coding systems : electromagnetic coding strip and servo motor.
As a  guarantee of precision and speed, lasers work with speeds higher than 3 m / sec and 6 G of acceleration.

Lasers are equipped with LED lighting in order to clearly see the entire engraving / cutting working area.

The honeycomb cutting table allows to reduce points of contact and limit burning traces when cutting material

 

The laser control panel features explicit pictograms for easy machine operation.

A key switch activates the laser tube.
The emergency stop is located on the top of the machine for easy access.

To increase  engraving and cutting possibilities, our lasers are equipped with opening doors.

It is possible to open side doors and insert materials larger than laser.
Examples: for door,  rifle, walking stick engraving

 

Materials and supplies needed

Materials for laser cutting/engraving

We have selected a wide variety of materials specially developed for laser cutting/engraving  and covering a large range of indoor/outdoor applications.

According to your needs : signage, trophies, front panels, industrial signage, badges... we can offer the best material.

laserable rubber for stamp making

Sheet of no-odor vulcanized rubber for stamp making.

Compatible with water or oil based inks.

Thermark for metal marking

Marking metals with a Co2 laser is possible using Thermark : available in tape, bottle or spray, a thin layer of product is applied on the product surface to produce unalterable black marking when touched by the laser beam.

Works on steel, stainless steel, brass, aluminum, copper, chrome Titanium, nickel, gold, silver, tin.

Materials and supplies needed

Materials for laser cutting/engraving

We have selected a wide variety of materials specially developed for laser cutting/engraving  and covering a large range of indoor/outdoor applications.

According to your needs : signage, trophies, front panels, industrial signage, badges... we can offer the best material.

laserable rubber for stamp making

Sheet of no-odor vulcanized rubber for stamp making.

Compatible with water or oil based inks.

Thermark for metal marking

Marking metals with a Co2 laser is possible using Thermark : available in tape, bottle or spray, a thin layer of product is applied on the product surface to produce unalterable black marking when touched by the laser beam.

Works on steel, stainless steel, brass, aluminum, copper, chrome Titanium, nickel, gold, silver, tin.

Materials and supplies needed

Materials for laser cutting/engraving

We have selected a wide variety of materials specially developed for laser cutting/engraving  and covering a large range of indoor/outdoor applications.

According to your needs : signage, trophies, front panels, industrial signage, badges... we can offer the best material.

laserable rubber for stamp making

Sheet of no-odor vulcanized rubber for stamp making.

Compatible with water or oil based inks.

Thermark for metal marking

Marking metals with a Co2 laser is possible using Thermark : available in tape, bottle or spray, a thin layer of product is applied on the product surface to produce unalterable black marking when touched by the laser beam.

Works on steel, stainless steel, brass, aluminum, copper, chrome Titanium, nickel, gold, silver, tin.

Materials and supplies needed

Materials for laser cutting/engraving

We have selected a wide variety of materials specially developed for laser cutting/engraving  and covering a large range of indoor/outdoor applications.

According to your needs : signage, trophies, front panels, industrial signage, badges... we can offer the best material.

laserable rubber for stamp making

Sheet of no-odor vulcanized rubber for stamp making.

Compatible with water or oil based inks.

Thermark for metal marking

Marking metals with a Co2 laser is possible using Thermark : available in tape, bottle or spray, a thin layer of product is applied on the product surface to produce unalterable black marking when touched by the laser beam.

Works on steel, stainless steel, brass, aluminum, copper, chrome Titanium, nickel, gold, silver, tin.

Materials and supplies needed

Materials for laser cutting/engraving

We have selected a wide variety of materials specially developed for laser cutting/engraving  and covering a large range of indoor/outdoor applications.

According to your needs : signage, trophies, front panels, industrial signage, badges... we can offer the best material.

laserable rubber for stamp making

Sheet of no-odor vulcanized rubber for stamp making.

Compatible with water or oil based inks.

Thermark for metal marking

Marking metals with a Co2 laser is possible using Thermark : available in tape, bottle or spray, a thin layer of product is applied on the product surface to produce unalterable black marking when touched by the laser beam.

Works on steel, stainless steel, brass, aluminum, copper, chrome Titanium, nickel, gold, silver, tin.

Videos

Documentation

Download

  • Brochure commerciale Lasers de gravure découpe Industrie GB

  • Brochure commerciale Lasers de gravure découpe Industrie GB

  • Brochure commerciale Lasers de gravure découpe Industrie GB

  • Brochure commerciale Lasers de gravure découpe Industrie GB

  • Brochure commerciale Lasers de gravure découpe Industrie GB

Faq

Co2 laser means the type of laser source used in the machine.
The laser beam is generated inside  an airtight space containing Co2 gas, by a pumping operation that creates a flow of monochromatic light (single wavelength), constituting  the laser beam of 10.6 microns.

"Plotter" corresponds to the guiding system of the laser beam. In  case of  plotter system, the laser beam is reflected by mirrors moving  along two axes Y (front to back) and X (left right). This  system offers a large engraving and cutting surface, linked to the size of axis.

Our range starts from 450 x 300 mm (V2000) to 1600 x 1000 (Eko 16) working surfaces.

 

Co2 laser means the type of laser source used in the machine.
The laser beam is generated inside  an airtight space containing Co2 gas, by a pumping operation that creates a flow of monochromatic light (single wavelength), constituting  the laser beam of 10.6 microns.

"Plotter" corresponds to the guiding system of the laser beam. In  case of  plotter system, the laser beam is reflected by mirrors moving  along two axes Y (front to back) and X (left right). This  system offers a large engraving and cutting surface, linked to the size of axis.

Our range starts from 450 x 300 mm (V2000) to 1600 x 1000 (Eko 16) working surfaces.

 

Co2 laser means the type of laser source used in the machine.
The laser beam is generated inside  an airtight space containing Co2 gas, by a pumping operation that creates a flow of monochromatic light (single wavelength), constituting  the laser beam of 10.6 microns.

"Plotter" corresponds to the guiding system of the laser beam. In  case of  plotter system, the laser beam is reflected by mirrors moving  along two axes Y (front to back) and X (left right). This  system offers a large engraving and cutting surface, linked to the size of axis.

Our range starts from 450 x 300 mm (V2000) to 1600 x 1000 (Eko 16) working surfaces.

 

Co2 laser means the type of laser source used in the machine.
The laser beam is generated inside  an airtight space containing Co2 gas, by a pumping operation that creates a flow of monochromatic light (single wavelength), constituting  the laser beam of 10.6 microns.

"Plotter" corresponds to the guiding system of the laser beam. In  case of  plotter system, the laser beam is reflected by mirrors moving  along two axes Y (front to back) and X (left right). This  system offers a large engraving and cutting surface, linked to the size of axis.

Our range starts from 450 x 300 mm (V2000) to 1600 x 1000 (Eko 16) working surfaces.

 

Co2 laser means the type of laser source used in the machine.
The laser beam is generated inside  an airtight space containing Co2 gas, by a pumping operation that creates a flow of monochromatic light (single wavelength), constituting  the laser beam of 10.6 microns.

"Plotter" corresponds to the guiding system of the laser beam. In  case of  plotter system, the laser beam is reflected by mirrors moving  along two axes Y (front to back) and X (left right). This  system offers a large engraving and cutting surface, linked to the size of axis.

Our range starts from 450 x 300 mm (V2000) to 1600 x 1000 (Eko 16) working surfaces.

 

You have a project ? Need an info ?

Contact us